Accessing The Setup Program - Toshiba Portege M200 Maintenance Manual

3.26 SETUP
3.26.2

Accessing the SETUP Program

Selecting 0-SETUP from the DIAGNOSTICS MENU and pressing Enter displays the followings:
MEMORY
Total
SYSTEM DATE/TIME
System Date
System Time
BATTERY
Battery Save Mode
PASSWORD
Not Registered
HDD PASSWORD
HDD
HDD Password Mode = User Only
User Password
Master Password
↑↓→← : Select items Space, BkSp: Change values
Esc: Exit without saving
CONFIGURATION
Device Config. = Setup by OS
DRIVERS I/O
Built-in HDD = Primary IDE(1F0H/IRQ14)
PC Card = Others (190H/IRQ3)
PCI BUS
PCI BUS = IRQ10, IRQ11
↑↓→← : Select items Space, BkSp: Change values
Esc: Exit without saving
NOTE: (*1) This depends on model.
Portege M200 Maintenance Manual (960-457)
SYSTEM SETUP (1/2)
= XXXXX KB (*1)
=XX-XX-XXXX
=XX:XX:XX
= Full Power
= Built-in HDD
= Not Registered
= Not Registered
Home : Set default values
Home : Set default values
3 Tests and Diagnostics
ACPI BIOS version = X.XX
BOOT PRIORITY
Boot Priority =HDD → FDD → CD-ROM → LAN
HDD Priority =Built-in HDD → PC card
Network Boot Protocol = PXE
DISPLAY
Power On Display
LCD Display Stretch
Others
CPU Cache
Level 2 Cache
Dynamic CPU Frequency Mode
=
Switchable
Auto Power On
PgDn, PgUp: Change pages
End: Save changes and Exit
PC CARD
Controller Mode = Auto-Selected
PERIPHERAL
Internal Pointing
Hard Disk Mode = Enhanced IDE(Normal)
LEGACY EMULATION
USB KB/Mouse Legacy Emulation
USB-FDD Legacy Emulation
PCI LAN
Built-in LAN = Enabled
SD
SD Controller = Enabled
PgDn, PgUp: Change pages
End: Save changes and Exit
= Auto-Selected
= Enabled
= Enabled
= Enabled
Dynamically
= Disabled
Device = Enabled
= Enabled
Enabled
=
3-69