Toshiba Portege M200 Maintenance Manual page 233

4 Replacement Procedures
4. Remove the Cross function button.
Figure 4-32 Removing t he Cross function button
5. Remove the following screw fixing the FL inverter. After peeling off the insulator,
remove the harness from both sides and remove the FL inverter.
• M2×4Z
6. Remove the following screws fixing the LCD unit.
• M2 ×4Z
7. With the bottom edge of the LCD unit on the display cover, raise the top edge of the
LCD unit. Remove the glass tapes to remove two LCD cables from the connector on
the back of the LCD.
4-44
BIND screw
M2x4Z BIND
Figure 4-33 Removing the FL Inverter
BIND screw
4.19 LCD unit/FL inverter
Cross function button
x1
Insulator
FL inverter
x4
Portege M200 Maintenance Manual (960 -457)