Toshiba Portege M200 Maintenance Manual page 143

3.16 Bluetooth Test
NICSPC53.EXE
Follow the steps below to perform the test program, NICSPC53.EXE. This Program checks the
function. Refer to Section 2.17, Bluetooth Troubleshooting, for a detailed description of the
troubleshooting procedures for the Bluetooth.
1. Preparing the target machine for NICSPC53.EXE.
(b) Insert a floppy disk containing the test program into the target machine and turn the
target machine.
(c) Prompts are displayed as shown in figure 3-4, if it is the first time the program has
run.
The Program NICSPC53.EXE runs.
(d) When the machine is initializing, the following message is shown.
----------------------------------------------------------------------------
-
Bluetooth Subsystem T&D for PCSE(CS-Air) VerX.XX
Co.
----------------------------------------------------------------------------
-
+----------------------+
| DUT
+----------------------+
Initializing ...
Portege M200 Maintenance Manual (960-457)
|
Figure 3-4 Initializing for NICSPC53.EXE
3 Tests and Diagnostics
Copyright (C) by TOSHIBA
3-41