Toshiba Portege M200 Maintenance Manual page 198

4.2 Battery pack
Installing the battery pack
The following describes the procedure for installing the battery pack. (See Figure 4-1.)
Caution: There is a danger that the lithium ion battery pack may explode if not fitted,
operated, handled, or disposed correctly. Dispostickerways the used
batteries pack in accordance with the laws and ordinances of your local
authority. Use only the batteries approved by Toshiba.
Note: Check visually the battery terminals and clean off any dirt with a dry cloth.
1. Turn off the power of the computer.
2. Disconnect the AC adapter and all other external devices from the computer.
3. Inset the connector of the battery to the connector of the computer. Press the
battery pack until the battery is locked.
4. Secure the battery lock.
Portege M200 Maintenance Manual (960-457)
4 Replacement Procedures
4-9