3.13 NDP Test
3.13 NDP Test
To execute the NDP test, select 10-NDP TEST from the DIAGNOSTICS TEST MENU, press
Enter and follow the directions on the screen. The NDP test contains one subtest.
Subtest 01
NDP
This test checks the following functions of NDP. This test can be executed when
NDP is installed. NDP is installed when the bit 1 of configuration byte is "1".
q Control word
q Status word
q Bus
q Addition
q Multiplication
Portege M200 Maintenance Manual (960-457)
3 Tests and Diagnostics
3-33