Figure 2-65 Mounting The 2Nd Expansion Interface Card - NEC SL1100 Hardware Manual

ISSUE 5.0
5. In case a 2nd PCB is mounted, insert two Nylon-spacers into the specified holes, and fasten two
Metal-spacers into the specified holes. (Both Nylon and Metal spacers are provided with 080E/
008E/000E/1PRIU)
Fasten two screws to secure the 2nd PCB to the top of the 080E/008E/000E/1PRIU.
Expansion Interface Card
(2nd PCB)
Nylon-Spacers
Expansion Interface Card
(1st PCB)
Hardware Manual
J2

Figure 2-65 Mounting the 2nd Expansion Interface Card

Screws
J1
Screw position
Both sides are
the same.
SL1100
2nd EXP.
PCB
Metal-Spacers
2-45