Setup Of Ntp Client; Saving Management And Configuration Information; Storage Of Mmb Configuration Information; Figure 5.17 Example Of [Backup/Restore Mmb Configuration] Window - Fujitsu PRIMEQUEST 2000 Series Installation Manual

CHAPTER 5 Work after Operating System installation

5.6 Setup of NTP client

5.6 Setup of NTP client
See "6.2 Setup of NTP", for the setup of the NTP client.
5.7

Saving management and configuration information

This explains about how to save the following information. Be sure to save the UEFI configuration information.
- 5.7.1 Saving MMB configuration information
- 5.7.2 Saving BIOS configuration information
Remark
Save the UEFI configuration information regularly after starting the operation. For saving EFI configuration information, see
"5.7.2 Saving BIOS configuration information"
All the screenshots are display examples. The contents displayed may differ depending on the system configuration.

5.7.1 Storage of MMB configuration information

This explains the method to take back-up of the MMB configuration information on remote PC.
[Maintenance] menu in MMB Web-UI is used, for storing the MMB configuration information.
Operations
1. Select the [Maintenance]-[Backup/Restore Configuration]-[Backup/Restore MMB Configuration]
→ [Backup/Restore MMB Configuration] window is displayed.
FIGURE 5.17
Example of [Backup/Restore MMB Configuration] Window
106
CA92344-0536-01