Figure 5.9 Dump Device Selection Menu - Fujitsu PRIMEQUEST 2000 Series Installation Manual

CHAPTER 5 Work after Operating System installation
5.3 Setting of sadump
Press [Enter] key.
10.
The dump device is created. Return to dump device configuration menu.
Warning
When the dump device is created, it is initialized. Depending on the size of the selected disk or that of
the disk partition, the time required for initialization would be different. In some cases, it takes time for
initialization, and then it takes a few minutes or more to change to the next window.
Dump Device Selection Menu
FIGURE 5.9
96
CA92344-0536-01