CHAPTER 5 Work after Operating System installation
5.8 "Write Policy" recommended setting of SAS array controller card
2.
Click [Backup] button
→ Storage location dialogue box of browser is displayed.
3.
Select the storage pass and click the [OK] button
→ Downloading of configuration information file is started.
Initial file of the MMB configuration information for back-up is as follows.
MMB_ (Date on which the backup of the file taken)(MMB version).dat
5.7.2 Storage of BIOS configuration information
This section describes the method for taking the backup of the BIOS configuration information on a remote PC.
[Maintenance] menu in MMB Web-UI is used for storing the BIOS configuration information.
Operations
1.
Select the [Maintenance]-[Backup/Restore Configuration]-[Backup BIOS Configuration]
→ [Backup BIOS Configuration] window is displayed.
2.
Select the radio button of partition which takes the backup of configuration information, and click [Backup] button.
→ Dialogue box which specifies the storage location, is displayed.
3.
Select the storage pass and click [OK] button.
Initial file name of the BIOS configuration for back-up is as follows.
Partition number_ Date on which the backup of the file is taken_(BIOS version).dat
5.8
"Write Policy" recommended setting of SAS array
controller card
You can attach a flash backup unit to SAS array controller card (including dual channel).
Example of [Backup BIOS Configuration]
FIGURE 5.18
107
CA92344-0536-01