Figure 4.2 File Structure - Fujitsu PRIMEQUEST 2000 Series Installation Manual

CHAPTER 4 Installation of Operating System and bundled software
4.6 Procedure to install RHEL into internal HDD/SSD
#
Remark
Read the part of <version>, <release>, <arch> properly.
b. Download the driver/utility of FC Card from the following URL.
http://support.ts.fujitsu.com/
Note
Though PRIMERGY is described in the downloaded binary, driver/utility can be used by the PRIMEQUEST
2000 series.
c. The file to be downloaded is copied in an arbitrary directory of the PRIMEQUEST 2000 series and then
extracted.
#
d. The file given below is extracted.
Remark
For the method of installing "SNIA HBA API library", see readme.txt extracted under HBA_API_LIB.
e. Reboot the partition after installation.
4. The dump area is configured.
Confirm that hard disk has enough free space before collecting the memory dump.
After OS installation, do a setting of kdump as following:
a. Change the setting of Grub's parameter "crashkernel" to "256MB".
(example)
Edit the file "/etc/grub.conf" as following:
default=0
timeout=5
splashimage=(hd0,0)/grub/splash.xpm.gz
hiddenmenu
title Red Hat Enterprise Linux Server (<kernel revision>.x86_64)
root (hd0,0)
kernel /vmlinuz-<kernel revision>.x86_64 ro root=UUID=xxxxxxxx-xxxxxxxxxxxx-xxxxxxxxxxxx ro
rd_NO_LUKS LANG=ja_JP.UTF-8 rd_NO_MD SYSFONT=latarcyrhebsun16 KEYBOARDTYPE=pc KEYTABLE=jp106
rd_NO_LVM rd_NO_DM crashkernel=256M
initrd /initramfs-<kernel revision>.x86_64.img
b. Change setting of kdump to work with small memory
- Case of Red Hat Enterprise Linux 6.4
Add setting of cp command to core_collector of /etc/kdump.conf file
Edit the file "/etc/kdump.conf" as following:
core_collector cp --sparse=always
extra_bins /bin/cp
[Note] makedumpfile command cannot be used for core_collector because the command uses big memory
- Case of Red Hat Enterprise Linux 6.5
rpm -ivh libnl-<version>-<release>.<arch>.rpm
tar xvzf F1010350.tar.gz
FIGURE 4.2
and system may run out of memory.
File Structure
75
CA92344-0536-01