Settings Of Console Redirection; Figure 3.27 Example Of [Ipv4 Console Redirection Setup] Window - Fujitsu PRIMEQUEST 2000 Series Installation Manual

CHAPTER 3 Work before Operating System Installation
3.5 Partition Configuration (Extended Partitioning)

3.5.7 Settings of Console Redirection

When operating system is installed to Extended Partition, it is necessary to assign VGA/USB2/rKVMS of SB resource and
set Console Redirection.
Set the Console Redirection to the subnet same as management LAN.
Remark
If VGA/USB2/rKVMS of SB resource is not assigned Console Redirection cannot be set.
[IPv4 Console Redirection Setup] window
1. Click [Partition] - [Console Redirection Setup] - [IPv4 Console Redirection Setup] window.
 [IPv4 Console Redirection Setup] window is displayed. For details on window, see "1.3.3 [Console Redirection
Setup] window" of PRIMEQUEST 2000 series Tool Reference (CA92344-0539).
FIGURE 3.36
2. Set IP address and subnet mask to access Console Redirection LAN for IPv4
3. Enable video redirection and virtual media respectively.
4. Click [Apply] button.
Note
After installation, disable the functions not used.
Example of [IPv4 Console Redirection Setup] Window
56
CA92344-0536-01