CHAPTER 3 Work before Operating System Installation
3.5 Partition Configuration (Extended Partitioning)
3.5.3 Assigning SB resources to Extended Partition
Resources on the SB assign the Extended Partition.
Operations
1.
Click [Partition]-[Partition#x Extended Partition Configuration] - [SB]
→ [Extended Partition Configuration of SB Resources] window is displayed. For details of [Extended Partition
Configuration of SB Resources] window, see "1.3.3 Partition#x Extended Partition Configuration] window" of
PRIMEQUEST 2000 series Tool Reference (CA92344-0539).
FIGURE 3.33
2.
Sets the partition name.
Enter the partition name in [Partition name] cell and click [Apply] Button.
Remark
The name can be input up to 16 characters. The characters that can be used are as follows.
[0-9], [a-z], [A-Z], half-width space, # (Sharp), _ (Underline), and – (Hyphen)
3.
Assign CPU resources to Extended Partition.
Enter the number of assigning CPU Core in [CPU] - [CORE] cell of the Extended Partition and click [Apply] Button.
Remark
Clicking the [+/-] Button in [CPU] – [SKT] cell can be increased or decreased the number of specified core in one
CPU socket unit.
4.
Assign memory resources to Extended Partition.
Enter the capacity of memory by one gigabyte in [Memory] - [GB] cell of the Extended Partition and click [Apply]
Button.
Note
- Extended partition needs at least 4GB of memory capacity.
Example of [Extended Partition Configuration of SB Resources] Window
50
CA92344-0536-01