Operation And Programming With Honeywell Diamond Protocol; Introduction; Hegs5000/5001 Controller; Power Up - Honeywell ACUIX User Manual

Operation and Programming with Honeywell
Diamond Protocol

Introduction

HEGS5000/5001 Controller

Power Up

Document 800-01023 Rev A
02/08
The availability of the ACUIX features and the way the ACUIX features are controlled is
governed by the controller being used and the ACUIX protocol setting. This chapter
describes the operation of the ACUIX set to Honeywell Diamond protocol and controlled
by a model HEGS5000, HEGS5001 or HJZTP joystick controller.
Upon power up of the ACUIX, a start up
screen displays the protocol, baud rate,
parity, data bits, camera model, and
software (VXWorks and FPGA) release
dates and versions. If the Honeywell
startup screen has been turned off in the
setup menus, an X displays in its place.
ACUIX High Speed Dome User Manual
---- ACUIX Dome ----
Protocol ........... Diamond
9600 baud no parity -8bits
Camera ............... Model
Honeywell Video Systems
DOMEApp date version B0
FPGABit date version B1
Please wait......_8
CAM-0006 M
3
29