True Day/Night Camera With Wide Dynamic Range, Progressive Scanning And Image Stabilization (Vk-S654) - Honeywell ACUIX User Manual

Operation and Programming with Honeywell Diamond Protocol
35X True Day/Night Camera with Wide Dynamic Range, Progressive
Scanning and Image Stabilization (VK-S654)
34
The White Balance can be set to manual mode. If the unit is in manual mode, the red and
blue gain settings can be set between 0 (low) and 255 (high).
The 26X color camera features motion detection. There are four default motion detection
zones. If motion detection is set to ON, and the camera detects motion in any one of the
four zones, the message Motion Detected displays on the video. The message remains
on the video until the ACUIX either is controlled by the operator, responds to an alarm, or
performs the default function. Once motion is detected, the ACUIX automatically disables
motion detection. The user must re-enable motion detection through the setup menus.
The 35X camera has a feature called Wide Dynamic Range (WDR) that can be enabled or
disabled. The wide dynamic range is only functional if the camera is in auto iris mode. When
the wide dynamic range is enabled, the camera scans the scene and sets the exposure
level so both the dark areas and bright areas in a scene can be viewed.
When the controller is in manual mode the wide dynamic range is disabled and the auto
digital shutter does not go below 1/60s for NTSC. The exposure setting (iris, gain or shutter)
that is controlled when the camera is in manual exposure mode is selectable, while the
other two will be in auto mode.
The White Balance can be set to manual mode. If the unit is in manual mode, the red and
blue gain settings can be set between 0 (low) and 511 (high).
The 35X camera also features progressive scanning, image stabilization, and motion
detection. When the default interlace scanning is set to the default ON, the camera scans
all the odd lines and then all the even lines of video. If the interlace scanning is set to OFF,
the camera is in progressive scan mode and scans all the lines of video. When the interlace
scanning is set to ON, the wide dynamic range and motion detection features are disabled.
The 35X camera features electronic Image Stabilization (EIS) to eliminate blurry and jumpy
video when the camera is bumped or jostled due to wind or traffic vibration. If the Image
Stabilization is set to ON, the motion detection feature is disabled. When EIS is enabled, the
camera reduces the area of the CCD that is scanned. This causes the video displayed on
the monitor to appear to have zoomed in. When the dome undergoes a pan or tilt operation,
electronic Image Stabilization is disabled while the camera moves, and then re-enables
after the camera has stopped moving for a five second period.
The 35X camera features motion detection. There are eight default motion detection zones.
If motion detection is set to ON, and the camera detects motion in any one of the eight
zones, the message Motion Detected displays on the video. The message remains on