3Rd Party Protocols - Honeywell ACUIX User Manual

3rd Party Protocols

Document 800-01023 Rev A
02/08
The ACUIX dome supports the following 3rd party protocols:
• Pelco P
• Pelco D
When using the ACUIX in any of the supported 3rd party protocols, perform the following
procedure to access the ACUIX on-screen setup menus:
1. Send the ACUIX dome to Preset 90. Refer to the specific controller's manual for
sending Preset commands.
2. Use the joystick up, down, left, and right functions on the controller to move the
cursor to the desired option.
3. Use the Iris Open function to select an option.
4. Use the pan left and right commands (if applicable) to move horizontally between
fields in a table.
5. Use the tilt up and down commands (if applicable) to move vertically between fields in
a table.
6. When a field requires text entry, press Iris Open to activate the field, move the joystick
up or down until the desired character displays and then press Iris Open again.
7. Use the Iris Close function to exit (ESC to exit) menus.
ACUIX High Speed Dome User Manual
87