Installing the Pan and Tilt Camera Assembly and Lower Dome
Installing the Pan and Tilt Camera Assembly
18
Table 1-1
ACUIX Pan and Tilt Camera Assembly Model Numbers
Model Number
Description
HDCFP0000
ACUIX Pan and Tilt with 26X WDR & TDN, PAL Camera
HDCGN0000
ACUIX Pan and Tilt with 35X WDR & TDN w/ EIS, NTSC Camera
HDCGP0000
ACUIX Pan and Tilt with 35X WDR & TDN w/ EIS, PAL Camera
1.
Set the switches on the printed circuit board as required for your system
configuration. See
Chapter 2, Switch
Figure 1-1
ACUIX Pan and Tilt Camera Assembly
Printed Circuit Board (Set Switches)
2.
Line up the alignment label (yellow label with black dot) below the locking guide in
the housing with the alignment label (yellow label with black dot) on the locking rail
on the pan and tilt camera assembly.
Settings.
Camera