Honeywell ACUIX User Manual page 52

Operation and Programming with Honeywell Diamond Protocol
52
Creating a Privacy Zone
1. Press Dome Menu
Press + or – until Sector/Priv Menu displays on the LCD and Press Enter.
2.
Press + or – until Program displays on the LCD and Press Enter.
3.
Press + or – until P displays on the controller LCD and Press Character Select.
4.
5. Enter the password (the factory set password is blank, just press Enter to submit a
blank password):
a. Press the + or – key to display the required character on the LCD screen and
press Character Select. The controller sends the character to the ACUIX.
b. Repeat step a until the password is complete and press Enter.
6. Enter the desired privacy number (1-32) for the new privacy zone and press Enter.
7. Enter the Privacy Zone title (up to 22 characters):
a. Press the + or – key to display the required character on the LCD screen and
press Character Select. The controller sends the character to the ACUIX.
b. Repeat step a until the password is complete and press Enter.
Privacy Zone options are displayed on the monitor. Press + or – until S displays on
8.
the LCD and press Character Select.
9. A box appears on the video screen representing the privacy zone:
a. Position the camera to view the scene you want blanked.
b. Use the up, down, left and right arrow keys to resize the box so the area that
you want blanked is covered by the box.
10. Press Enter to Save the Privacy Zone.
11. Program another Privacy Zone or press Clear/Manual to exit programming and
return the ACUIX to manual control.