Program & Operation; Dome Camera Selection; Function - Honeywell HWC-S363-RV Instruction Manual

PROGRAM & OPERATION

Dome Camera Selection

Prior to start programming or operating a dome camera, please make sure that both the
camera and the joystick controller are communicating. In order for changes to take effect
for a camera, particular camera's ID must be selected on the controller.
Example: Pressing 1 , 6 and CAM key sequentially will select dome camera 16. The
selected dome camera ID will be displayed on the monitor.
Principle of joystick usage in the programming (editing) mode

1 Function

By pressing the MENU button on the keyboard controller, the following On-screen Main
Menu will be shown on the monitor screen.
PTZ SPEED DOME CAMERAS
17