With Stand - Honeywell C1 Quick Installation Manual

Wi-Fi connection LEDs
During Wi-Fi connection, the LED indicates the following.
LED
Blinking Green
Solid Green
Solid Red (for 2
seconds)
Solid Purple
Blinking Blue
Options
Choose your Geofencing and Honeywell Membership options (if you skip them you
can change them easily later).
Placement

With stand

Place the camera in a desired location for
viewing and recording.
On the wall
You can also mount the camera directly to
the wall without the stand.
Camera state
Connecting to Wi-Fi network.
Connected to Wi-Fi network.
Connection failed. LED will then turn solid purple.
QR Code scan complete.
Go to "Connect to Wi-Fi" on page 3.
Camera has lost bluetooth connection. Unplug
camera and plug it back in. See "Connect the power
cord" on page 2 for instructions.
4