On-Screen Setup Menus
Camera Options, 35X WDR & True Day/Night Camera with Image
Stabilization and Motion Detection
(VK-S654)
110
Vertical Phase 0–359.9
1.
Select 6 from the Camera Options menu to enable or disable the Vertical Phase
Edge for line locking the camera. Selecting 6 toggles between ENABLED and
DISABLED. If you select ENABLED, you can set the Vertical Phase from 0 to 359.9.
2.
If you selected ENABLED, select 7 to change the Vertical Phase.
Enter a number from 0 to 359.9 and press Enter.
Select 5 from the Main menu to access the
Camera Options menu.
Caution
This menu is for qualified technical personnel only. Changing the
Camera Options can make the video unusable. Restore the default
settings to bring video back.
Maximum Digital Zoom
Select 1 from the Camera Options menu to toggle between the available options to set
the lens Maximum Digital Zoom. The available values are 1x, 2x, 4x, and 12x (default).
Note
If Image Stabilization is enabled, the digital zoom is restricted to 2x.
CAMERA OPTIONS
1 Max Digital Zoom Mag .. 12X
2 Exposure Control
3 Video Setup
4 White Balance
5 Still Preset .......... OFF
6 Vert Phase Edge .. DISABLED
7 Vert Phase 0-359.9 .... 0.0
8 Image Stabilization ... OFF
9 Motion Detection ....... ON
ESC to Exit