Baud Rate; Table 2-2 Dip Switch Sw6 Acuix Baud Rate Settings - Honeywell ACUIX User Manual

Baud Rate

Document 800-01023 Rev A
02/08
DIP SW6, position 1 through 4 are used to set the baud rate. The baud rate of the ACUIX
and the control equipment must be the same.
Note If there are invalid settings on SW5 or SW6 regarding protocol or baud rate,
the system defaults to Diamond protocol at 9600 baud rate.
Table 2-2 DIP Switch SW6 ACUIX Baud Rate Settings
Baud Rate
1
600 OFF
1200 ON
2400 OFF
4800 ON
9600 OFF
19200 ON
38400 OFF
57600 ON
115200 OFF
ACUIX High Speed Dome User Manual
Switch Position
2 3 4
OFF OFF OFF
OFF OFF OFF
ON OFF OFF
ON OFF OFF
OFF ON OFF
OFF ON OFF
ON ON OFF
ON ON OFF
OFF OFF ON
23