Honeywell ACUIX User Manual page 73

Document 800-01023 Rev A
02/08
Press the joystick down until 7
3.
Delete PS/PT/PZ/Sector is
highlighted, and then press Iris Open.
4. Press Focus Near until the desired
function (Privacy Zone, Preset, Preset
Tour, or Sector) displays.
5. Use the tilt up function on the joystick
until the desired number displays. Use
the pan left and pan right functions to
move between the digits, if necessary.
6. Press Iris Open. If deletion of the programming was successful, the message
Delete Success displays on the monitor. If the selected function and number
(Preset, Preset Tour, Privacy Zone, or Sector) was not programmed, it cannot be
deleted, and the message Does Not Exist displays on the monitor.
7. To exit, press Iris Close.
ACUIX High Speed Dome User Manual
Delete Privacy Zone # --
Focus Near to change options:
Iris Close to Exit
73