Table 7-14 Manual Exposure Modes; Video Setup - Honeywell ACUIX User Manual

On-Screen Setup Menus
112
Table 7-13 Auto Exposure Control Mode Settings
Digital Slow Shutter
Auto AER+3 Mode Settings
NightShot Control
Auto NightShot Sensitivity
Digital Slow Shutter
2. Select 2 to change the Manual AE Mode. Pressing 2 toggles between the available
settings: Iris, Gain, or Shutter. This setting applies when the controller is set to
manual iris mode.
Table 7-14 Manual Exposure Modes
Setting
Iris (default setting)
Gain
Shutter

Video Setup

Select 3 from the Camera Options menu to
access the Video Setup menu. The default
settings are shown to the right.
1. Select 1 to change the Exposure
Level. The default setting is 91; 0 =
dark to 255 = bright. Enter a number
between 0 and 255, then press Enter.
2. Select 2 to change the Maximum AGC
Level. The default setting is 216.
High level (255) = bright picture,
noise in picture.
Low level (0) = dim picture, no noise.
Enter a number between 0 and 255, then press Enter.
3. Select 3 to change the Chroma Level. The default setting is 140.
0 = no color
255 = color is saturated
Enter a number between 0 and 255, then press Enter.
4. Select 4 to toggle the Backlight Compensation ON or OFF. The Backlight
Compensation is only operational when the unit is in Auto Exposure Mode and the
Wide Dynamic Range is off.
AUTO
AUTO
LOW
AUTO
Description
The iris function is controlled manually and the
camera controls the gain and shutter
automatically.
The gain is manually controlled and the camera
controls the iris and shutter automatically.
The shutter is controlled manually, and the
camera controls the iris and gain automatically.
1 Exposure Level ........ _91
2 Max. AGC Level 0-255 .. 216
3 Chroma Level 0-255 .... 140
4 Backlight Comp ........ OFF
5 Auto Slow Shutter Lim ... ¼
6 Wide Dynamic Range .... OFF
7 Interlace Scanning .... OFF
ESC to Exit
VIDEO SETUP