Ptz Functions; Configuring Ptz Functions; Programming Ptz Preset Positions - Honeywell Performance HDZP252DI User Manual

PTZ Functions

This chapter contains the following sections:
•
•
•
•
•
•
•
•
•
•
•

Configuring PTZ Functions

Programming PTZ Preset Positions

You can program up to 300 preset points for the pan/tilt/zoom camera. A preset point is a
pre-programmed position that your PTZ camera can move to automatically when a user selects
a preset to go to.
Programming a Preset Point
1.
2.
Programming PTZ Preset Positions, page 79
Programming PTZ Tours, page 81
Configuring PTZ Scans, page 82
Configuring PTZ Patterns, page 83
Configuring Pan Settings, page 85
Configuring the PTZ Movement Speed, page 85
Configuring PTZ Idle Motion Actions, page 86
Configuring Power Up Actions, page 87
Configuring Time Task Actions, page 88
Restarting the PTZ Camera, page 89
Restoring PTZ Default Settings, page 89

Navigate to Setup PTZ
Click Add to add a new Preset to preset list. If multiple presets are listed, or you want to
modify a preset that was previously configured, make sure the line for the preset you want
to program is selected before performing steps 3 and 4.
 
Function Preset (see
6
Figure 6-1).
800-22757 - A - 02/2017
6