Main Menu; Selecting The Language; Display Options - Honeywell ACUIX User Manual

Main Menu

Selecting the Language

Display Options

Document 800-01023 Rev A
02/08
When the setup menus are accessed, the
main menu is the first menu displayed. The
camera model installed in the ACUIX displays.
In this example, the VK-S654 is installed.
The screens shown in this chapter are
displayed when the ACUIX is set for Standard
protocol except where noted in the Function
Programming Menu.
If the ACUIX is set for VCL protocol, ESC to
Exit becomes Iris Close to Exit. Move
the joystick up or down to highlight a menu
option and then press Iris Open to select the
option.
All future instructions assume you have the
main menu or a submenu of the main menu
displayed.
The screens in this document show the default
settings.
Select 1 repeatedly from the main setup menu until the desired language (English,
Francais, Deutsch, Italiano, Espanol, Polski, or Nederlands) displays in the field. The
on-screen options are displayed in the language selected. English is the default language.
Select 2 from the main setup menu to set up
the video Display Options.
Camera Message
Select 1 from the Display Options menu to
toggle the camera ID display ON (default) or
OFF. The camera display is generated by the
address selection of the dome. If the address
of the dome is 1, the camera ID display is CAM
0001; if the address of the dome is 50, the
camera ID display is CAM 0050.
ACUIX High Speed Dome User Manual
ACUIX Dome
Camera...............VK-S654
----------------------------
1 Language. . . . . English
2 Display Options
3 Control Options
4 Diagnostic Options
5 Camera Options
6 Function Programming
7 Enhanced Settings
ESC to Exit
ACUIX Dome
Camera...............VK-S654
----------------------------
1 Language . . . . . English
2 Display Options
3 Control Options
4 Diagnostic Options
5 Camera Options
6 Function Programming
7 Enhanced Settings
IRIS CLOSE to Exit
DISPLAY OPTIONS
1 Camera Msg . . . . . . ON
2 Sectors . . . . . . . . ON
3 Preset Names . . . . . ON
4 Digital Zoom Msg
5 Start-up Screen Msg . . ON
6 Change Camera Name Loc.
7 Change Sector Name Loc.
8 Crosshairs . . . . . .OFF
9 Dome Name Settings
ESC to Exit
. . .OFF
89