Table 4-3 Preset Tour Programming Fields - Honeywell ACUIX User Manual

Document 800-01023 Rev A
02/08
1. Press and hold 'Lock', then press 'F6' ('Menu') and then press 'aux' to enter the
ACUIX dome menu.
Use the tilt down function on the joystick until 6 Function Programming is
2.
highlighted, and then press Iris Open.
Push the tilt down function on the joystick until 2 Program a Preset Tour is
3.
highlighted, and then press Iris Open.
4. Use the tilt up function on the joystick until the desired Preset Tour number (1–16)
displays, and then press Iris Open.
5. Use the tilt up and down and the pan left and right functions of the controller to
move between fields.
Table 4-3 Preset Tour Programming Fields
FIELD Usage
NUM (number) Move the cursor to the desired field and press Iris Open to
activate. Use the tilt up and down functions of the controller to
change the value. If the field is more than one digit, each digit
can be changed individually by placing the cursor on the digit
and using the tilt up or down function.
PRESET Selectable from 0 to 70, 74 and 100 to 160. Presets 71–73,
and 75–99 are reserved for special functions and cannot be
entered in a Preset Tour. When the field has the desired
number, press Iris Open to select the number. If a reserved
Preset is entered in the field, Iris Open is not accepted. Iris
Open also moves the cursor to the next field.
VELOCITY The Velocity field is the pan and tilt speed for the ACUIX to go
to the Preset (1 to 480°/second). The default is 480°/second.
DWELL The Dwell Time is how long the ACUIX waits before it goes to
the next Preset in the list (0 to 99 seconds).
Note Inserting Presets: To insert a Preset between Presets, position the
cursor on the second Preset and press Focus Near to insert a line.
Deleting Presets: To delete a Preset, place the cursor on the Preset
line and press Focus Far. The entire PreShot line is deleted.
When you are finished entering Presets, press Iris Close. The cursor moves to S =
6.
Save.
7. Press Iris Open to save the Preset Tour. To exit without saving, use the pan left
function to move the cursor to E = Exit and press Iris Open.
ACUIX High Speed Dome User Manual
67