Washer Will Not Fill - ALLIANCE HWF561*E1102 Service

Section 3 Troubleshooting (MDC Models)

23. WASHER WILL NOT FILL

52
Washer Will Not Fill.
(1)
Is there 120 Volt
AC across the input side of
the pressure switch to "FS2" on
the motor control board?
Yes
(2)
Is there 120 Volt
AC from the input side of the
mixing valves to "FS2" on the
motor control board?
Yes
(3)
Is there 120 Volt
AC from the input side of
the mixing valve to "H1-9" or "H1-3"
of the motor control board?
Yes
Change the mixing
valve.
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Correct wiring
No
between pressure
switch and control
board.
Check for cracked
or broken wiring
No
at the pressure
switch. Change
inoperative
pressure switch.
No
Change the motor
control board.
FLW304S
800168