Section 4 -Grounding; Wall Receptacle Polarity Check - ALLIANCE HWF561*E1102 Service

To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect electric power to the washer before servicing.
• Never start the washer with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the washer is properly grounded.

36. WALL RECEPTACLE POLARITY CHECK.

(Figure 15).
Neutral
Side
Round
Grounding
Prong
800168
Section 4
Grounding
L1
115±12
V.A.C.
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
WARNING
Ground
Neutral
0
V.A.C.
115±12
V.A.C.
W011GE3A
Figure 15
NOTE: Have a qualified
electrician check polarity of
wall receptacle. If a voltage
reading is measured other
than that illustrated, the
qualified electrician should
correct the problem.
W003
79