ALLIANCE HWF561*E1102 Service page 19

Section 3 Troubleshooting
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect electric power to the washer before servicing.
• Never start the washer with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the washer is properly grounded.
SERVICE PROCEDURE: WORN BRUSHES
a. Remove motor from washer. Refer to Paragraph 58.
b. Using a flashlight, view brushes through holes in motor end shield. Refer to Figure 13.
c. Inspect both brushes to determine if either brush is worn. Refer to Figures 13 and 14.
GOOD BRUSH
– Has visible amount of
brush material remaining.
d. Replace worn brushes with 738P3 Motor Brush Kit. Follow instructions provided in kit.
17
Brush
Spring
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
WARNING
FLW1648S
FLW1648S
Figure 13
Brush
Holder
Brush
W003
800168