Loading Door - ALLIANCE HWF561*E1102 Service

Section 6 Adjustments
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect electric power to the washer before servicing.
• Never start the washer with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the washer is properly grounded.

64. LOADING DOOR

a. Open loading door.
b. Remove door bezel to gain access to nuts. Refer
to Figure 46.
Loading Door
Attaching Screw
MODELS WITH THE LETTER "E" IN THE
EIGHTH CHARACTER OF THE MODEL NUMBER
120
Washer
Lockwasher
Nut
Door
Bezel
Inner Door
and Glass
Hinge
Assembly
H211SE1B
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
WARNING
c. Remove screws, washers and nuts holding
loading door to hinge assembly and remove
door. Refer to Figure 46.
Door Bezel
Attaching Screw
Inner Door
and Glass
Attaching
Hinge
Assembly
MODELS WITH THE LETTER "H" OR "J" IN THE
EIGHTH CHARACTER OF THE MODEL NUMBER
Figure 46
Lockwasher
Loading
Door
Screw
W003
Door
Bezel
Nut
Inner
Door
and
Glass
H212SE1B
800168