Bit No.
Bit Name
Bits[7:0]
Reserved
Address 0x0105 Main Delay Register (Default: 0x0000)
Table 14.
Bit No.
Bit
Description
Name
Bits[15:13]
Reserved
Always write as 0 if writing to this register.
Bits[12:0]
Main
These register bits are used to specify the lip synchronization delay for
delay
the main channel.
0x0000 = 20.83 µs (1 sample delay at 48 kHz)
0x0001 = 20.83 µs (1 sample delay)
0x0002 = 41.66 µs (2 sample delay)
...
0x1C20 = 150 ms (7200 samples delay)
Address 0x0106 Automatic Volume Control (Default: 0x350C)
Table 15.
Bit No.
Bit Name
Bits[15:12]
AVC maximum
gain
Bits[11:8]
AVC decay time
ADAV4601 System Design Document
Rev.1 August 2009
Description
Always write as 0 if writing to this register.
Description
Used to control the maximum gain in the range of 0 dB to 15 dB. This is
the maximum gain
that can be applied to the input signal in order to reach the desired
output level.
0x0 = 15 dB
0x1 = 14 dB
0x2 = 13 dB
0x3 = 12 dB
0x4 = 11 dB
0x5 = 10 dB
...
0xF = 0 dB
Used to control the decay time in the range of 20 ms to 12 sec. The
decay time
corresponds to the time required for the output to reach the desired
level.
0x0 = 20 ms
0x1 = 100 ms
0x2 = 200 ms
0x3 = 500 ms
0x4 = 1 sec
0x5 = 2 sec
0x6 = 3 sec
0x7 = 4 sec
0x8 = 5 sec
0x9 = 6 sec
0xA = 7 sec
0xB = 8 sec
0xC = 9 sec
0xD = 10 sec
Analog Devices
Default
00000000
Default
000
0000000000000
Default
0011
0101
Confidential Information
Page 72
Need help?
Do you have a question about the ADAV4601 and is the answer not in the manual?
Questions and answers