Trim Kit Descriptions - Monogram ZIC36N RH Custom Options Manual And Installation Instructions

Trim kit ZGC2 - Provides 1/4" grille panel frame side pieces for
descriptions
83-1/2" and 84-1/2" installation heights. The supplied
grille panel frame is factory set for 84".
ZKHC1 - Provides the necessary framework to install
custom handles, of your choice , onto 1/4" thick panels.
(Handles not included.)
ZKHCSSI - Tubular stainless steel handles for 1/4" thick
panel installations.
ZKHTC1 - Provides the necessary framework to install
custom handles, of your choice , onto 3/4" thick panels.
(Handles not included.) This kit must be used in
combination with ZKTC36L or ZKTC36R
1/4" Panels with standard
handles. No kits required.
3/4" Custom panels with
supplied handle. Trim Kit
ZKTC36L (or ZKTC36R)
Design Information
36" Bottom Mount Refrigerator
ZKHTCSS1 - Tubular stainless steel handles for 3/4"
thick panel installations. This kit must be used in
combination with ZKTC36L or ZKTC36R
ZKTC36L (left opening models),
ZKTC36R (right opening models) - Provides for the
installation of 3/4" thick custom door and grille panels.
This kit provides a standard handle to fit 3/4" thick
panels.
ZFC1 Trim Kit - For side to side installation of 2
refrigerators. This kit provides a trim strip to cover the
side case trim for a finished appearance.
1/4" Custom panels with
custom handles. Trim Kit
ZKHC1.
3/4" Custom panels with
custom handles. Trim kits
ZKTC36L (or ZKTC36R)
and ZKHTC1.
1/4" Custom panels with
Tubular Stainless Steel
handles, Trim Kit
ZKHCSS1.
3/4" Custom panels with
Tubular Stainless Steel
handles, Trim Kits
ZKTC36L (or ZKTC36R)
and ZKHTCSSI
6