1/4" Thick Panels Using Standard Trim; 1/4" Thick Panels Using Standard Trim And Zkh1 Trim Kit; Thicker Panels Secured To 1/4" Thick Backing, Using Standard Trim - Monogram ZIS36NY Custom Options Manual And Installation Instructions

Custom Door Panel Dimensions Using Standard Trim
1/4" thick panels
panels secured to 1/4" thick backing
Freezer Panel
15 1/4"
Raised Panel on 1/4" Thick Backing
1/4"
Appearance
Thick
Panel
Backing
1 1/4"
Clearance
hinge side
Case Trim
or
Fresh Food Panel
67 7/8"
19 1/4"
2" Clearance
handle side
Door
Handle
Monogram
Dimensions &
Specifications
ZIS36NY
36" Built-In Refrigerator
(non-dispenser)
Standard Trim with 1/4" Panels
• 1/4" Panels: Cut panels to size.
• Custom handles with 1/4" door panels require Trim Kit
ZKH1.
Standard Trim with Panels secured to
1/4" thick backing
• Applying a raised panel design to a 1/4" thick backing
(screwed or glued): Cut 1/4" panels to size, fabricate
the raised panel to permit clearances of at least 2"
from the handle side for fingertip clearance, 1-1/4"
from the hinge side to avoid striking adjacent
cabinetry and 5/16" from the top and bottom edges to
allow for the trim flange then install.
• Countertops adjacent to refrigerator installation
should be mitered 45° degrees.
Note: ZKHT1 custom handle kit cannot be used in this
configuration.
Custom Grille Panel
35"
9" 1/4" Thick Panel
The grille panel frame is factory assembled
for 84" installation height. If installation height
varies, order ZG1 trim kit which provides
optional side trim pieces. Cut custom, Lexan
or stainless panel to sizes shown below.
Installation Height Panel Height
83"
83-1/2"
84-1/2"
Important: Maintain 1-1/2" min. gap between
top of doors and bottom of panel frame.
®
8"
8-1/2"
9-1/2"
7