1/4" Thick Custom Panels Or Panels Secured To 1/4" Thick Backing - Monogram ZIC36N RH Custom Options Manual And Installation Instructions

Custom Door Panel Dimensions Using Standard Trim
1/4" thick panels
Panels secured to 1/4" thick backing
Fresh Food Panel
Caution: Maximum weight for fresh food panel is
50 pounds and 30 pounds for freezer drawer panel.
Raised Panel on 1/4" Thick Backing
Using Standard Handles
1/4"
Appearance
Thick
Panel
Backing
2" Clearance
handle Side
or
35-1/16"
45 1/2"
21 11/16"
Freezer Panel
35 1/8"
5/16" Clearance
Fresh Food Panel
5/16" Clearance
2" Clearance
Handle End
Freezer Panel
5/16" Clearance
5/16" Clearance
Custom Panel Dimensions
36" Bottom Mount Refrigerators
ZIC36N Bottom Mount Refrigerator
• 1/4" Panels: Cut panels to size.
• Custom handles with 1/4" door panels require Trim kits
ZKHC1 or ZKHCSS1 for tubular stainless steel
handles).
Standard Trim with Panels secured
to 1/4" thick backing
• Applying a raised panel design to a 1/4" thick backing
(screws or glued): Cut 1/4" thick panels to size. On the
fresh food door, fabricate the raised panel to permit at
least 2" fingertip clearance of the standard handle. 1-
1/4" clearance from the hinge side to avoid striking
adjacent cabinetry and 5/16" from the top and bottom
edges to allow for the trim flange. For the freezer
drawer, allow 2" clearance at the top handle end and
5/16" clearance on both sides and the bottom edge to
allow for trim flange.
Note: ZKHTC1 custom handle kit cannot be used in
this configuration.
Custom Grille Panel
35 1/8"
8" 1/4" Thick Panel
The grille panel frame is factory assembled for 84"
installation height. If installation height varies, order
ZGC2 trim kit that provides optional side trim pieces.
Cut grille panel to sizes shown below.
Installation Height
83-1/2"
84-1/2"
1-1/4"
Clearance
hinge side
Panel Height
7-1/2"
8-1/2"
8