Table of Contents
Advertisement
Step 3
Assemble
panel,
extrusion and
handle
Decorator
Door Panel
Fresh food door:
• Remove the door extrusion and custom panel.
• Drill 1/16" pilot hole through extrusion.
• Drill clearance holes through the panel and extrusion.
• Assemble the door panel, extrusion and custom handle.
• Install screw(s) long enough to pass through the
• Slide the assembly into the door frame until the new
• Reinstall original screws into the door extrusion.
Handle
extrusion, door panel and into the handle.
extrusion fits firmly against the steel door.
ZKHC1 Trim Kit (for 1/4" Panels)
Extrusion
3/4" Min.
1-1/2" Max.
Freezer drawer:
• Remove the handle extrusion and panel.
• Drill 1/16" pilot hole through extrusion.
• Drill clearance holes through the panel and extrusion.
• Assemble the door panel, extrusion and custom
handle.
• Install screws(s) long enough to pass through the
extrusion, door panel and into the handle.
• Slide the assembly into the drawer trim until the new
extrusion fits firmly against the steel drawer.
• Reinstall original screws into the extrusion.
Support for custom handles
Screw
Decorator
Door
Panel
Install
4 Screws
21
Advertisement
Table of Contents
