Zkhr1 Trim Kit (For 1/4" Panels); Support For Custom Handles - Monogram ZIR36N LH Installation Instructions Manual

ZKHR1 Trim Kit (For 1/4" Panels)
Support for Custom Handles
Tools and materials required:
#2 Phillips screwdriver
Drill and appropriate bits
Custom door panel
Custom Handle
Safetg glasses
Right hand door swing models are illustrated in these
instructions. Follow these instructions for left hand
models.
Parts List:
A. Handle side door extrusion (for left hand models)
B. Handle side door extrusion (for right hand models)
This kit provides the necessarg framework to install
a custom handle, of 9our choice, onto a 1/4" thick
custom panel. {Handles not included.) The extrusions
in this kit allow the custom handle to be secured to
the door structure, rather than the door panel.
Select the extrusion for 9our model, discard other
extrusion.
Step 1
Remove
handle
Open door to 90 ° . Remove the screws from the full
length aluminum handle.
Retain screws. Discard handle.
2O