Table of Contents
Advertisement
Step 1
Fresh food door:
Remove
• Open door to 90°.
handles
• Remove the Phillips head screws from the full length
and trim
• Open the door fully to stop.
• Remove the screws from the aluminum trim, top
• Retain screws. Discard original trim and handle.
Freezer drawer:
• Slide the drawer fully open.
• Lift out top and bottom freezer
• There are 2 sets of 4 screws on
• Loosen all screws.
• Carefully, lift off entire drawer
• Place door on a protected surface,
• Remove light switch plate by
• Turn the drawer over, front side
handle, remove handle.
bottom, hinge and handle side.
baskets.
the inside of the drawer door.
Insert putty knife behind screw
cover and snap off. Retain screw
covers.
door.
front side down. Take care not to
bend switch plate on the bottom of
the door.
backing out 3 Phillips head
screws. Retain switch plate and
screws.
up. Remove trim on both sides,
bottom and handle. Retain all
screws.
ZKTC36L/ZKTC36R Trim Kit
3/4" Custom Panels
Drawer Slides
Light Switch Plate
Inside Freezer Drawer
Attachment Screws
Light Switch Plate
Front Face Freezer Drawer
23
Advertisement
Table of Contents
