Table of Contents
Advertisement
ZIC36N RH
Models
available
36" wide model with handle on the left side, the door
swings left to right.
Advance
These refrigerators are designed to be customized with
planning
decorator door and grille panels. Field installed custom
exterior
door and grille panels are required for these models.
appearance
options
Factory installed trim will accommodate 1/4" thick
custom panels, Lexan
Door and grille panel sizes vary to accommodate the kit
being used. Sizes are provided in this booklet.
Caution: Maximum panel weight for fresh food door is
50 pounds and 30 pounds for freezer drawer panel.
Side panels must be used whenever the sides of the
refrigerator will be exposed. Side panel sizes vary
depending on the installation.
3/4" thick custom panels-Without trim kits
A raised panel design, screwed or glued to a 1/4" thick
backing can be used. See page 8 for panel sizes and
clearances.
®
or stainless steel panel kits.
Design Information
36" Bottom Mount Refrigerator
ZIC36N LH
36" wide model with handle on the right side, the door
swings right to left.
You should:
1. Select the appearance option.
2. Order the trim kit for that option.
3. Order the custom door and grille panels from the
cabinet manufacturer. The exact dimension for each
trim kit application is provided in this booklet. Find
and pull out the page for your application and fax or
send it to the cabinet manufacturer. The cabinet
manufacturer must have this information to con-
struct the panels accurately.
4. Determine the final installation situation and order
matching side panels.
5
Advertisement
Table of Contents
