Adding; Manual Adding-Up By Pressing The M+ Key - KERN CWS Operating Instruction

12 Adding

The balance is equipped with a summation memory used for adding up of identical
counted parts to total quantity and total weight.
The balance is set by the factory for manual adding-up (by pressing the M+ key). For
automatic adding-up the function F-03-01 must be set to "1" (see chpt. 14.2) in the
menu.
Likewise you can activate the summation data (positive/negative weighing values) in
the menu, see function F-03-02 (chpt. 14.2).

12.1 Manual adding-up by pressing the M+ key

1. Select reference weight and place
number of parts for first weighing.
2. After carrying out a rest position control
add the display value to the summation
memory by pressing the
The stored value is indicated by a bleep
and the flashing [
"M+". After dead stop control was car-
ried out the balance will return auto-
matically to counting mode.
Place the piece number on the balance for a second weighing and add them to the
memory by pressing the M+ key.
Add and weigh more parts if needed as described above.
Please note that the balance must be unloaded between the individual weighing pro-
cedures (display < +5d).
Note:
If the balance issues four bleeps or if the [
balance was not unloaded between the individual weighings or the weighing value is
not stable (see also function F-03-02)
Deleting the last M+ sum up
1. Keep pressing the
2. The balance issues a bleep and deletes the last M+ sum up.
If 4 bleeps are sounded, there are no M+ sum ups to delete.
CWS-BA-e-0610
key.
] display next to
key, press the
] display next to "M+" does not flash, the
key, then let go of both.
123
29