Automatic Adding-Up - KERN GAB-N Series Operating Instructions Manual

10.7 Automatic adding-up

This function is used to automatically add individual weighing values to the
summation memory and to receive a printout from a possibly connected optional
printer.
For details on how to set this function see chap. 11 menu: „ACC on")
 Place load A
 Remove load A

(Example)

 Place goods to be weighed B.
 Remove load B
 ACC 2, followed by the total weight will be displayed and

(Example)

0.0
GROSS
ZERO
 Add more weighed goods as described before.
 You can repeat this process until the capacity of the scales is
30
After stabilisation control has taken place, you will hear an
audio sound.
The weighing value will be saved to the summation memory.
ACC 1, followed by the weighing value will be displayed and
possibly printed.
Afterwards the weighing scales change to zero display.
After the standstill control sounds a signal tone.
The weighing value is added into the total adding memory.
possibly printed.
Afterwards the weighing scales change to zero display.
Please note that the balance must be unloaded between the
individual weighing procedures.
exhausted.
GAB-N-BA-e-1817