Numeric Entering Of The Reference Weight - KERN CWS Operating Instruction

9.3 Numeric entering of the reference weight

If you know the reference weight/piece you can enter this via number keys.
1. Turn on balance by pressing the
ON/OFF key. The three LEDs on the
keys "piece weight by" are flashing. If
this is this not the case, press the
key. If desired, place the tare container
on the balance and tare by pressing the
TARE key.
2. Press key
the reference weight display and the
ENTER key are flashing
3. Enter reference weight via numeric
keyboard (Incorrect inputs can be de-
leted by pressing the C key
The reference weight display and the
ENTER key are flashing.
4. Confirm by pressing the
Note:
An insufficient reference weight is indi-
cated by an acoustic signal and the
message "Lo ut". The process will be
reset to step 3.
Now you can place the parts to be counted onto the weighing plate.
All piece number parameters of your load are displayed.
CWS-BA-e-0610
a
).
a
key.
a
0.000
Kg
0.000
Kg
0.000
Kg
0
g
32
g
0
32
g
23