7. Confirm by pressing the
menu item "F-05-03" used to set the upper
tolerance limit appears. Enter setting, using
the numeric keypad.
8. Use the
key to store. The next menu
item "F-05-04" used to set the lower toler-
ance limit appears. Enter setting, using the
numeric keypad.
9. Confirm by pressing the
menu item used to set the acoustic signal
for tolerance control appears. Enter setting,
using the numeric keypad (000 = sound
disabled. 001 = sound enabled).
10. Use the
key to store. The next menu item (see chpt. 14.2) appears. The
same procedure applies to further settings.
11. To exit the menu, press the
ance on.
32
F-05-03
key. The next
F-05-04
F-05-05
key. The next
key. Use again the
100
90
010
key to switch the bal-
CWS-BA-e-0610