KERN CWS Operating Instruction page 3

8.2 Automatic switch-off function AUTO OFF ____________________________ 16
8.3 Balance zero display/zero tracking__________________________________ 16
8.4 Stability display _________________________________________________ 16
8.5 Taring__________________________________________________________ 17
8.6 Simple operating mode ___________________________________________ 17
9 Parts counting_________________________________________________ 18
9.1 Start of add-up process ___________________________________________ 18
9.2 Determination of the reference weight by weighing ____________________ 19
9.2.1 Reference piece number 10 _____________________________________________ 19
9.2.2 Reference piece number 5, 25, 50 or 100 __________________________________ 20
9.2.3 Optional reference piece number _________________________________________ 21
9.2.4 Optional reference piece number without using the
9.3 Numeric entering of the reference weight ____________________________ 23
9.4 Retrieving a stored reference weight via ID no.________________________ 24
10 PRE-TARE __________________________________________________ 25
11 Storing a reference weight _____________________________________ 26
11.1 Storing by ID numbers ____________________________________________ 26
11.2 Deleting a stored reference weight __________________________________ 27
11.3 Simultaneous deleting of all ID memories ____________________________ 28
12 Adding _____________________________________________________ 29
12.1 Manual adding-up by pressing the M+ key ___________________________ 29
12.2 Automatic adding-up _____________________________________________ 30
12.3 Displaying a sum total ____________________________________________ 30
12.4 Deleting all stored weighing data ___________________________________ 30
12.5 M- function _____________________________________________________ 30
13 Weighing/counting with tolerance range _________________________ 31
13.1 Parameter selection (see also chapter 14.2) __________________________ 31
13.2 Display of set tolerance limits ______________________________________ 33
13.3 Changing set tol. limits by using the
14 The menu ___________________________________________________ 34
14.1 Navigation in the menu ___________________________________________ 34
14.2 Menu overview __________________________________________________ 35
15 Description of individual functions ______________________________ 41
15.1 ACAI function (automatic counting accuracy improvement = automatic
reference optimisation) _________________________________________________ 41
15.1.1 ACAI automatic mode _______________________________________________ 41
15.1.2 ACAI manual mode _________________________________________________ 43
15.2 AWA function (audible weighing assist = acoustic fill-to-target) _________ 44
15.2.1 Enabling/disabling the AWA function ____________________________________ 44
16 Data output RS 232C__________________________________________ 47
16.1 Technical specifications of interface ________________________________ 47
16.2 Data output _____________________________________________________ 48
CWS-BA-e-0610
- key____________________ 22
key instead of setting in menu____ 33
3