Adjustment --------------------------------------------------------------------------------------------- 8 Adjusting------------------------------------------------------------------------------------------------ 8 Operation------------------------------------------------------------------------------------------ 9 Overview of display CM 60-2N / CM 150-1N / CM 320-1N / CM 1K1N ---------------- 9 Overview of display CM 50-C2N ----------------------------------------------------------------- 9 Overview of display CM 500-GN1 --------------------------------------------------------------- 9 Operating elements---------------------------------------------------------------------------------- 9 7.4.1...
1 Technical data KERN CM 60-2N CM150-1N CM 320-1N CM 1K1N Readout (d) 0,01 g 0,1 g 0,1 g Weighing range (max) 60 g 150 g 320 g 1.000 g Taring range (subtractive) 60 g 150 g 320 g 1.000 g...
EN 61000-6-1 :2001 Standard for calculator : EN 55022 : 1998+A1 : 2000 EN 55024 : 1998+A1 : 2001 If a change is made to the above mentioned appliances without consulting KERN this declaration will become invalid Date: 01.10 2004 Signature: Gottl.
For this purpose, the answerable user must define a suitable interval as well as the nature and scope of this check. Information is available on KERN’s home page (www.kern- sohn.com) with regard to the monitoring of balance test substances and the test...
Observe the information in the operating instructions Please read the operating instructions carefully before erecting and commissioning, even if you already have experience with KERN balances. Staff training The device may only be operated and looked after by trained members of staff.
Pocket balance • Batteries • Operating instructions • Test weight (only CM 5-C2N, CM 500-GN1) • Weighing container (only CM 50-C2N, CM 500-GN1) • Draft shield (only CM 50-C2N, CM 500-GN1) Battery operation and change • Battery conservation through automatic power-off 3 –4 minutes after ending a weighing operation.
6.4 Draft shield + weighing container (CM 50-C2N, CM 500-GN1) After weighing: Before weighing: • Put Draft shield and weighing • Put on Weighing pan pan over weighing plate • Unfold draft shield • Place the weighing material on weighing plate.
7 Operation 7.1 Overview of display CM 60-2N / CM 150-1N / CM 320-1N / CM 1K1N (Units on display) 7.2 Overview of display CM 50-C2N (Units on panel sheet) 7.3 Overview of display CM 500-GN1 (Units on panel sheet) 7.4 Operating elements...
Weigh component , by pressing the key the net-total is displayed, this means the sum of the components If necessary fill the formula container up to the desirable level. To return to the weigh- ing mode press the CM-BA-e-0618...
“0” indication. The units set in the balance can be selected between the different units, by pressing Models: CM 60-2N / CM 150-1N / CM 320-1N / CM 1K1N Display Conversion factor 1 g =...
Mode Function Contrasting display which can also be read in the Backlight on „bl“ dark. Backlight off Save the battery „bl“ Backlight switches auto- Save the battery „bl“ matically off 10 sec after stable indication Confirm with the key. CM-BA-e-0618...
Remove any spilt material to be weighed immediately. Maintenance, upkeep The device may only be opened by trained service engineers authorised by KERN. Disposal The operating company shall dispose of the packaging and the device in compliance with the valid national or regional law of the operating location.
• Electromagnetic fields / static charging (choose different location/switch off inter- fering device if possible) Switch the balance off if other error messages should appear and then switch on again. Contact the manufacturer if the error message does not disappear. CM-BA-e-0618...