Parts Counting; Start Of Add-Up Process - KERN CWS Operating Instruction

9

Parts counting

With parts counting you can either count parts into a container or remove parts from
a container. To count a greater number of parts the average weight per part has to
be determined with a small quantity (reference quantity). The larger the reference
quantity, the higher the counting exactness. High reference must be selected for
small parts or parts with considerably different sizes.

9.1 Start of add-up process

Turn on balance by pressing the ON/OFF
key. If the display is not on zero, press the
-key.
The three LEDs on the keys
"piece weight by" are flashing. This is a
request to enter the method you wish to
apply for entering the reference weight.
Through the selection of the keys the following options are available to enter or retrieve
the reference weight:
Retrieving a stored reference
weight via ID no. (chpt.. 9.4)
Information:
You can return to this point during operation at any time by pressing the CE key
without deleting your settings (tare value, M+, tolerance limits).
18
a
Numeric input of reference
weight (Chpt.. 9.3)
0.000 0.00000
Kg
Determination of reference
weight by weighing (chpt.. 9.2 )
CWS-BA-e-0610
0
g