The Menu; Navigation In The Menu - KERN CWS Operating Instruction

14 The menu

14.1 Navigation in the menu

1. Switch off the balance
2. Keep pressing the
key. The first function F-00 will be
shown and flashing. Then let go of both
keys.
3. Invoke the desired function (see chpt. 13.2)
by pressing the appropriate numeric key
(e.g. 5).
4. Confirm by pressing the
number display will appear and the function
and current setting will be flashing. Now
you are able to either change the setting
(step 5) or to go to the next function (step
6)
5. Enter the desired setting (see chpt. 13.2)
via the numeric keypad
• Incorrect inputs can be deleted by pressing
the C key, repeat input
• If you want to cancel the process without
storing any inputs after pressing the EN-
TER key for the last time, press the
ON/OFF key to cancel.
6. Press the key to store your changes
and to go to the next function.
7. To exit the menu, press the
ance on.
If "Add ##" appears on the display, you can use this option to carry out reference
optimisation as the size of the sample was insufficient for an accurate count.
Either add the required piece number or ignore the message "Add ##" and con-
tinue the counting process by pressing the ENTER key. (This, however, will not
give accurate results). See also function "F-01-02", chpt.. 14.2.
34
key and press the
key, the piece
.
key. Use again the
F-00
F-05
F-05-01
F-05-01
F-05-02
-key to switch the bal-
CWS-BA-e-0610
0
1
1