Rtp_Ptime; Rtcp_Enable_N; Rtcp_Send_By_Sdp_N - Panasonic KX-UT670 Administrator's Manual

Section 5 Configuration File Programming
Value Range
Default Value
Web User Interface Reference

RTP_PTIME

Value Format
Description
Value Range
Default Value
Web User Interface Reference

RTCP_ENABLE_n

Parameter Name Example
Value Format
Description
Value Range
Default Value
Web User Interface Reference

RTCP_SEND_BY_SDP_n

Parameter Name Example
Value Format
160 Administrator Guide
1424–49150 (even number only)
Note
•
The value for this setting must be greater than or equal to
"RTP_PORT_MIN" + 400.
•
Changing this setting may affect the number of simultaneous
calls that can be made. Therefore, when setting this parameter,
be aware that the maximum number of necessary ports can be
calculated as shown below:
No. of lines ´ No. of channels ´ 2 ´ 10 (No. of terminals)
20000
Maximum RTP Port Number (Page 83)
Integer
Specifies the interval, in milliseconds, between transmissions of RTP
packets.
•
20
•
30 (not available with the G.722 codec)
•
40
20
RTP Packet Time (Page 82)
RTCP_ENABLE_1, RTCP_ENABLE_2, ..., RTCP_ENABLE_6
Boolean
Selects whether to enable or disable RTCP (Real-Time Transport
Control Protocol). For details, refer to RFC 3550.
•
Y (Enable RTCP)
•
N (Disable RTCP)
N
RTCP Enable (Page 84)
RTCP_SEND_BY_SDP_1, RTCP_SEND_BY_SDP_2, ...,
RTCP_SEND_BY_SDP_6
Integer
Document Version 2011-11