Honda EP3 Service Manual page 656

NOTE:
. The parking brake cables must not be bent or
distorted. This will lead to stiff operation and
premature failure.
. Refer to the Exploded View as needed during this
proceoure.
1 . R e l e a s e t h e p a r k i n g b r a k e l e v e r f u l l y .
2. Remove the rear console (see page 20-57).
Remove the parking brake cable clip (A) from the
b r a k e c a b l e ( B ) .
4 .
6 .
Disconnectthe parking brake cable from the lever
{c).
Remove the parking brake cable mounting
hardware, then remove the cable.
7 . l n s t a l l t h e n e w c a b l e i n t h e r e v e r s e o r d e r o f
removal. and note these items:
. Be careful not to bend or distort the cable.
. M a k e s u r e t h e p a r k i n g b r a k e c a b l e c l i p i s f u l l y
seated on the cable housing.
. Do the parking brake cable adjuslment (see page
1 9 - 7 ) .
19-27