Balancer Shaft Inspection - Honda EP3 Service Manual

1 .
Balancer Shaft Inspection
Seat the balancer shaft by pushing it away from the
o i l p u m p s p r o c k e t e n d o f t h e o i l p u m p .
Zero the dial indicator against the end of the
balancer shaft, then push the balancer shaft back
and forth and read the end olav.
Balancer Shaft End Play:
Fronl Balancer Shaft:
Standard {Newl: 0.070 0.135 mm
{0.0028 0.0053 in.}
Service Limit:
0.15 mm (0.006 in.)
Rear Balancer Shaft:
Standard {New): 0.070-0.135 mm
(0.0028 0.0053 in.l
Service Limit:
0.15 mm (0.006 in.)
2 .
3. Remove the baffle plate (A) and upper balancer
shaft holder {with bearings) (B), then remove the
front balancer shaft (C) and rear balancer shaft (D).
9 H . A
''/
.r
L=] j/
R
R f l | ]
3 I ] U U
r B e
+-
(cont'd)
8 - 1 1