The Wps Screen - ZyXEL Communications P870HNU-51B User Manual

The following table describes the labels in this screen.
Table 38 Wireless LAN > MAC Filter > Add
LABEL
MAC Address
Back
Apply

7.5 The WPS Screen

Use this screen to configure WiFi Protected Setup (WPS) on your Device.
WPS allows you to quickly set up a wireless network with strong security, without having to
configure security settings manually. Set up each WPS connection between two devices. Both
devices must support WPS.
Click Network > Wireless LAN >WPS. The following screen displays.
Figure 47 Network > Wireless LAN > WPS
The following table describes the labels in this screen.
Table 39 Network > Wireless LAN > WPS
LABEL
WPS Setup
Enable WPS
P-870HNU-51b User's Guide
DESCRIPTION
Enter the MAC addresses of the wireless devices that are allowed or denied access to
the Device in these address fields. Enter the MAC addresses in a valid MAC address
format, that is, six hexadecimal character pairs, for example, 12:34:56:78:9a:bc.
Click this to return to the previous screen without saving changes.
Click this to save your changes and go back to the previous screen.
DESCRIPTION
Select the check box to activate WPS on the Device.
Chapter 7 Wireless LAN
137